Friday, January 15, 2016

A Look At Aquarium Maintenance

By Charles Bell


A good care for the aquarium will provide a good and health environment for fish within the aquarium. Proper maintenance may prevent other bad effects that may occur if left for a longer period without unattended. Some of requirements include maintaining the required stability of water. Aquarium maintenance is of great importance in that the level of water is kept in check. The best method involves emptying the water and replacing it with clean one.

The persons owning the aquarium within the city of Dayton OH ought to know that, inspection is done on regular basis. It should be done daily to ensure that the arrangement of equipment is in order. It is during this period that the feeding habit of fish is the normal one. The change of normal behavior of fish is an indication that something ought to be done.

Counting is done every week for better record keeping. Through counting, one is able to know any of the dead inhabitants. Those reproduced recently are also determined. The water is investigated for the chemicals present. It is very important to do light cleaning on walls during this period. The replacement is done for the filters and the cartridges. The connections are then checked to ensure that they meet the required standards. Expiry dates for the aquarium replacement are also checked.

In the process of cleaning, the heater is initially disconnected. Then the decorations removed and placed in a safe place. Cleaning on its sides may form the most efficient starting point. It is good to check on the cleanliness of filters and decorations. If need be clean them. The gravel cleaner is prepared to perform the remaining part.

In case you have removed water for about 25-30% it is very essential that you should stop. As the process of cleaning continues it is always very important to keep adjusting the temperature for proper health of the fish. The temperature of must be carefully checked because very high temperatures may result in stressing the fish. The liquid is then refilled back by either the use of the faucet pump or the use of the bucket.

The contents that had been removed before commencing the process are restored. These include all the decorations. The filter is then finally reconnected followed by the heater and the pump. These are mainly done in the last stages after the cleaning process. Then ensure that everything is running normally.

When the water is frequently replaced, many factors are controlled. Pollution is too controlled in the process. When used liquid is removed it moves together with the pollutants. Nitrogenous components such as the ammonia and the nitrites are too removed. These wastes are very toxic to the fish and could be very harmful to them. Too much accumulation of wastes makes the water very acidic which can interfere with the physiological functions of fish. The removal of waste regulates the pH.

Clarity is improved by the frequent change of the liquid. This ensures the right intensity reaches the bottom. It also eliminates bad odors that could make the pale around inhabitable. The light that enters allows maximal growth of coral. During this the correct salt concentration is checked.




About the Author:



No comments:

Post a Comment